MOB Dress In Action

Details to come...

Muslin for MOB Dress

Bodice: Bernina My Label princess seam dress

• Bodice shortened to fit midriff
• Neckline lowered (may be lowered 1/2" more)
• Outer shoulder narrowed by 5/8"
• Gathers added to center front

Midriff: Butterick 4510 Maggy London, from 2005 (OOP)

• Pin-tucks, pleats, ruching or alternative will be included to add interest (lining pieces were used for this muslin)

Skirt: Burda Plus Autumn/Winter 2011 425A

• Skirt height trimmed to meet midriff at waist

Jacket:

• To be determined...

The Beginning of the MOB Dress

With some decisions made, the process has begun. I have been shopping for months, trying to find an appropriate dress to wear at my daughter’s upcoming wedding. MOB dresses seem to fall into the following categories:

• Las Vegas showgirl
• Muddy colored polyester knits incorporating sequins and geriatric styling
• Cringe-worthy MOB regulation uniform 

 

Well, that just isn’t going to work. I ended up at Sew Elegant, a little shop on West Avenue, in San Antonio. They have lovely formal wear fabrics. My first visit was several months ago during lunch hour. This time, DD#1 accompanied me and when she saw this fabric, we were done shopping!

 

Now I have to decide on which patterns to use. I’ve looked at every pattern website I can think of along with searches through my own pattern collection. All I know right now is that there will be an unlined jacket from the embroidered silk organza and a simple, full-length dress sewn from the silk dupioni. The lining is rayon - Ambiance Bemberg. I’m thinking there should be an underlined bodice, but don’t really want to underline the whole dress as drapey is preferred for the skirt.

The lines need to be clean. That means no fancy pleating, ruffles, etc. to compete with the embroidery. The purple of the flowers matches the purple of the bridesmaid dresses and the mother of the groom’s dress is a creamy beige lace, so these fabrics will certainly coordinate. Tell me though - does that even matter?

For the dress, I’m considering 425A from the Autumn/Winter 2011 Burda Plus.

And, for the jacket, McCall’s 9700 (OOP from 1998), view A with the short sleeves from view B. View A lacks the front princess seams of view B. No side seams either, but the center back seam, which gives shaping, needs to go as it would be a shame to break up the flowers. Frankenpattern? Likely...

And, yes, a muslin will be happening very soon!

Happy Mother's Day!

Enjoy your week!

Style Arc Anita Peasant Blouse

My new blouse is made from a teal rayon challis print purchased from Fabric.com nearly a year ago. I love it! The cropped pants, Burda Style 02-2011-123A, were sewn last April and have become a favorite.

I have been sewing other garments, too. I put together a pair of the Style Arc Peta cropped pants and another pair of the Ottobre Every-Woman’s Pant (05-2008-16). And, waiting their turn by the Bernina, are the cut pieces for the Style Arc Katherine pants. I’ll get you some pictures soon. By the way, the Style Arc Susan t-shirts fit well and are comfortable. I’ve retraced the pattern with the changes and am ready to make more.

BIG NEWS: DD#1 is getting married! I am making my dress for the wedding and I need to finalize the design and get busy. So far, I have a beautiful turquoise/Capri blue embroidered silk organza that I want to use for a shrug/little jacket thingy. There are also several yards of matching silk dupioni on order for the dress. It will be floor length and fully lined. 

I’ll definitely be stitching a muslin first. Now, the dress should be underlined, right? With silk organza? Bodice only? What is typical? I suppose I’ll need to figure out how to do an invisible zipper/lining combination…

Ah, a learning opportunity…

Style Arc Susan Top

I keep reading good things about Style Arc patterns. Enough, that I finally placed an order. I went with my measurements for choosing a size and once my patterns arrived, I knew I wanted to start with the Susan Top. After all, you really can’t get more basic than a t-shirt. I traced the pattern and compared it to my Bernina My Label t-shirt. Of course, the sleeve piece was too long. The rest, however, wasn’t too far off and curiosity dictated that I sew it up without any other changes. I pulled a leftover stretch jersey ITY to do the experiment. Yes, you have seen this fabric before.

I put clear elastic into the shoulders only because it took such a small amount and hoping I might actually want to wear the muslin.

The instructions have you turn under the neck edge and top stitch. Instead, I cut a strip two inches wide and did the usual neckband and coverstitched around the outside of the seam once it was sewn on. It helped to fill in the neck area.

I didn’t have enough fabric for long sleeves, so ¾ length for this one.

The resulting t-shirt fits me really well, yet could be a tad shorter. I pulled another less-than-wonderful leftover fabric, a matte jersey, made a few changes and made another muslin. I took an inch off the hem and morphed a new sleeve hem using the cap sleeve from view C (the pink one on the upper right) of Simplicity 5502. Yeah, long OOP, but in the pattern file and handy.

I kept the 2” neck band because I was lazy.  I didn’t steam the fabric this time; I merely pressed with a warm, dry iron. Remember - this was the fabric that grew.

I am going wear both of these t-shirts before making any more from the pattern. I have to tell you, so far I’m pleased, and the sting from the postage is quickly fading!

The Sleep Tee

The Bernina got a break this time as my new sleep tee was sewn entirely on the serger and coverstitch. I didn’t time it, but it sure felt like I’d spent more time changing out the threads and needles than actually sewing.

The usual t-shirt things happened:

• Clear elastic sewn into the shoulder seams
• ¼” serged seams
• Coverstitch neck binding
• 1” coverstitch hems

Though not glamorous or exciting, this oversized tee it is exactly what I want for a sleep garment. Nope, there are no snaps, buttons, zippers or elastic and it is big enough to be comfortable yet not too loose where I end up tangled in excess fabric.

 

Thanks goes to the clearance section of Hancock’s for this cotton knit fabric. I washed and dried it twice using hot water and the highest heat setting. The fabric became much softer and I’m hoping that the high temps took care of any future shrinkage.

 

The side seams are fairly straight and the tee certainly isn’t tapered, so I don’t know why (and frankly, I don’t care) it appears to be on the dress form.

I think this no-brainer project would adapt very well to assembly-line sewing. Well, as long as the thread color remained the same.

 

Next? Well, winter and long sleeves are over, but still I want to work with variations of my shirt pattern, though it makes sense to produce quick t-shirts and elastic waist Capri’s. So, your guess is as good as mine!

It Works!

The shirt has been finished, worn and is now resting in the hamper. Though the fabric is not feminine, my greater concern was the fit. It both fits and is comfortable. I look forward to sewing the next one using prettier fabric. But, hey Mary Nanna, at least it isn’t denim!

 

For this shirt, it didn’t make sense to bother with flat-felled seams if I wasn’t sure what my seam allowances were going to be. Nor did I bother to do a rolled hem. Instead, I serged the edge and folded it up. It looks fine…

I am happy with the sleeve cap adjustment. I have very little knowledge of sleeve cap theory, but I do know that this looks much better and I’m glad I made the effort to tweak the pattern.

I fired up the 403A for the buttonholes. However, prior to the buttonholes, I had to find buttons. There were some natural shell ones in the stash (I’m fairly certain they came from Fashion Sewing Supply). They are ever so slightly larger than I preferred, so I took myself to both Hancock’s and JoAnn’s. No surprise, but neither store had buttons that would work. They were too big, too small or not enough of them in the same size. I gave up, went home, and made buttonholes to fit the natural shell buttons.

Next time, I want to shorten the bust dart. Now, don’t get me wrong, this pattern, just as it is, fits better than anything I could hope to find in retail, but still I think there is room for improvement. I like the shaping the bust dart provides, but it really needs to be less obvious, if only a little. I think I can figure this out. Don’t you?

 

I haven’t had a chance to try out the Lands’ End sleep shirt pattern yet as I keep changing my mind about which fabric to use for the testing…