Sunday, April 1, 2012

Style Arc Susan Top


I keep reading good things about Style Arc patterns. Enough, that I finally placed an order. I went with my measurements for choosing a size and once my patterns arrived, I knew I wanted to start with the Susan Top. After all, you really can’t get more basic than a t-shirt. I traced the pattern and compared it to my Bernina My Label t-shirt. Of course, the sleeve piece was too long. The rest, however, wasn’t too far off and curiosity dictated that I sew it up without any other changes. I pulled a leftover stretch jersey ITY to do the experiment. Yes, you have seen this fabric before.

I put clear elastic into the shoulders only because it took such a small amount and hoping I might actually want to wear the muslin.

The instructions have you turn under the neck edge and top stitch. Instead, I cut a strip two inches wide and did the usual neckband and coverstitched around the outside of the seam once it was sewn on. It helped to fill in the neck area.


I didn’t have enough fabric for long sleeves, so ¾ length for this one.

The resulting t-shirt fits me really well, yet could be a tad shorter. I pulled another less-than-wonderful leftover fabric, a matte jersey, made a few changes and made another muslin. I took an inch off the hem and morphed a new sleeve hem using the cap sleeve from view C (the pink one on the upper right) of Simplicity 5502. Yeah, long OOP, but in the pattern file and handy.


I kept the 2” neck band because I was lazy.  I didn’t steam the fabric this time; I merely pressed with a warm, dry iron. Remember - this was the fabric that grew.


I am going wear both of these t-shirts before making any more from the pattern. I have to tell you, so far I’m pleased, and the sting from the postage is quickly fading!

2 comments:

  1. I'm such a Style Arc fan and find the fit is worth the postage! Love your top.

    ReplyDelete
  2. They look good, and they look like shirts you would actually wear!

    ReplyDelete